Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

Managing announcements 

371

Restoring announcements 

You can restore announcements from system memory to an announcement circuit 
pack. Your system memory is a tape, disk, or memory card, depending on your 
system.

If you have a duplicated system, you system always restores the announcements 
located on the active processor.

Let’s restore announcements from our system memory (stored on a disk) to the 
integrated announcement circuit pack on our system.

To restore announcements from system memory to the integrated announcement 
circuit pack:

1. Type 

 and press 

RETURN

.

Let’s restore announcements from system memory to an announcement circuit 
pack that has built-in memory. We know that the announcement circuit pack is 
located at 01B18:

1. Type 

and 

press 

RETURN

.

2. Press 

ENTER

 to restore announcements.

If the system crashes or there is a processor interchange during restore 
announcements, the restore fails and there is no valid announcement on the circuit 
pack. Repeat the process when the system is operating properly.

You receive 
error code 
E28

You do not have an integrated announcement circuit pack in the system. 
Refer to your DEFINITY ECS System Description for more information.

You receive 
error code 
E31

A call is connected to the announcement on the circuit pack and the port is 
busy. Wait for the call to disconnect and try restore announcements again.