Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

Screen reference 

758

ISDN trunk group 

Appears when either the ISDN-PRI trunk or the ISDN-BRI trunk fields and the 
Basic Call Setup and Supplementary Services with Rerouting fields are set to 

 on 

the System-Parameters Customer-Options screen and when the Supplementary 
Service Protocol is either 

 or 

 and the Group Type field is 

on the ISDN 

trunk group screen.

Appears when the Group Type field is 

. Indicates whether to replace restricted 

numbers with administrable strings for incoming and outgoing calls assigned to 
the specified trunk group. This field applies to BRI and PRI trunks.

Appears when the Group Type field is 

. Indicates whether to replace 

unavailable numbers with administrable strings for incoming and outgoing calls 
assigned to the specified trunk group. This field applies to BRI and PRI trunks.

This field appears only if the QSIG Value-Added Lucent field on the Trunk Group 
screen is 

 and the Group Type field is 

. Specifies if the connected party’s 

number is sent on incoming or tandemed ISDN calls. Valid entries are 

, 

, or 

 

(restricted). If set to 

, the ISDN Numbering - Public/Unknown Format screen is 

accessed to construct the actual number sent, or the ISDN Numbering-Private 
screen (based on Numbering Format) is used. If set to 

, the connected number is 

sent “presentation restricted.”

Uses the most economical route, for example, the reconfigured 
call does not use the same trunk group as the original call.

Always reconfigures the call regardless of the trunk group used.

Enter 

 for the display to be replaced regardless of the service 

type of the trunk.

Enter 

 for the display to be replaced regardless of the service 

type of the trunk.