Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1011
Trunk Group
17
Incoming Disconnect (msec)
The field appears only for an incoming or two-way trunk group when the Trunk
Signaling Type field is either blank or
Signaling Type field is either blank or
cont
.
Outgoing Disconnect (msec)
Cama Outgoing Dial Guard (msec)
This field appears when Group Type is
cama
(the trunk group type used for
emergency 911 service).
Incoming Dial Guard (msec
)
NOTE:
This timer is never sent to TN429 ports.
Valid entries
Usage
50
to
2550
in
increments of
10
10
Enter the minimum valid duration of a disconnect signal for an
incoming call. The switch will not recognize shorter disconnect
signals. This field cannot be blank. For Brazil pulsed E&M
signaling, use
incoming call. The switch will not recognize shorter disconnect
signals. This field cannot be blank. For Brazil pulsed E&M
signaling, use
600
.
Valid entries
Usage
50
to
2550
in
increments of
10
10
Enter the minimum valid duration of a disconnect signal for an
outgoing call. The switch will not recognize shorter disconnect
signals. This field cannot be blank. This timer begins timing
when a disconnect signal is detected on an outgoing call and
resets when the signal is no longer detected. If the timer
expires, the trunk drops. For Brazil pulsed E&M signaling, use
outgoing call. The switch will not recognize shorter disconnect
signals. This field cannot be blank. This timer begins timing
when a disconnect signal is detected on an outgoing call and
resets when the signal is no longer detected. If the timer
expires, the trunk drops. For Brazil pulsed E&M signaling, use
600
.
Valid entries
Usage
25
to
6375
in
increments of
25
25
Enter the minimum interval between the receiving switch’s
seizure acknowledgment and the outpulsing of digits by this
switch.
seizure acknowledgment and the outpulsing of digits by this
switch.
Valid entries
Usage
10
to
2550
in
increments of
10
10
Enter the minimum acceptable interval between the detection
of an incoming seizure and the acceptance of the first digit. The
switch will not accept digits before this timer expires.
of an incoming seizure and the acceptance of the first digit. The
switch will not accept digits before this timer expires.