Lucent Technologies Medical Alarms Release 3 Version 8 User Manual
Upgrading CMS to the High Availability Option
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Setting Up CMS on an HA Server
3-14
c.
Enter the device path for the tape drive, for example:
/dev/rmt/0c
The system displays a list of ACD(s) backed up on the
volume and prompts:
volume and prompts:
Enter l to list the tables or v to also
verify the volume:
d.
Enter:
l
The system displays a list of the database tables included on
the backup.
the backup.
Setting Up CMS on an HA Server
3
Overview
3
This section refers to procedures which apply to both the new HA server
purchased by the customer and the original server (after it has been
upgraded with new disk drives supplied by a Lucent Speed Centre
facility).
purchased by the customer and the original server (after it has been
upgraded with new disk drives supplied by a Lucent Speed Centre
facility).
TSC personnel verify authorizations, set up data storage parameters,
and set up the CMS application remotely. On-site technicians should call
the TSC to coordinate this process.
and set up the CMS application remotely. On-site technicians should call
the TSC to coordinate this process.
Prerequisites
3
The TSC should verify that the on-site technicians have completed the
following tasks:
following tasks:
•
Connected the console to the CMS computer
•
Connected the CMS computer to the TSC’s Remote Maintenance
Center (remote console)
Center (remote console)
•
Connected additional terminals and printers to the NTS ports.
•
Connected the link between the CMS computer and the switch
If the hardware link or the Automatic Call Distribution (ACD)
feature and CMS are not properly administered, the CMS
software cannot communicate with the switch. For switch
administration procedures, see
feature and CMS are not properly administered, the CMS
software cannot communicate with the switch. For switch
administration procedures, see
.
NOTE