Lucent Technologies Medical Alarms Release 3 Version 8 User Manual
Upgrading CMS to the High Availability Option
CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Setting Up the Remote Console
3-56
Setting Up the Remote Console
C
Overview
C
This section describes how to redirect the remote console port on the
new HA server using the
new HA server using the
Solaris software package. Remote access is
required for both the primary and secondary servers. Redirecting the
console allows the TSC to dial in and do remote maintenance.
console allows the TSC to dial in and do remote maintenance.
Since the X.25 communications protocol is not supported on HA
systems, either port can be used for the remote console. However, the
standard provisioning convention is to use Port A for Enterprise 3000 and
3500 platforms and Port B for Ultra 5 platforms.
systems, either port can be used for the remote console. However, the
standard provisioning convention is to use Port A for Enterprise 3000 and
3500 platforms and Port B for Ultra 5 platforms.
Platform
Considerations
Considerations
C
•
All platforms.
Administering
the Remote
Console Port
the Remote
Console Port
C
To administer the remote console port on the back of the
CMS computer,
do the following:
1. Remove the current port administration by entering:
/cms/install/bin/abcadm -r ttyX
(where X is “a” or “b”)
The program responds:
Hardware Platform
Port A
Port B
Enterprise 3000
Enterprise 3500
Enterprise 3500
Remote
Console
Console
Not used
Ultra 5
Not used
Remote
Console
Console
tty
X is currently set to be incoming
Are you sure you want to change it? [y,n,?]