Linksys PAP2T-NA User Manual
Linksys PAP2 Devices Administrator’s Guide
5
STOP!
: Be sure to identify the correct
device prior to provisioning. The service
will not function if the incorrect
provisioning string is used.
will not function if the incorrect
provisioning string is used.
2. Connect the Linksys PAP2 to your network by
connecting one end of a network cable to the
Ethernet port and the other end to your
broadband router.
Ethernet port and the other end to your
broadband router.
Once the adapter is connected to the network
3. If you have the:
•
PAP2-NA or PAP2T-NA, continue
with the next step.
with the next step.
•
PAP2T-R, proceed to Step 13.
4. Using a standard telephone wire (RJ-11),
connect a telephone to the PHONE 1 port on
the back of your PAP device.
the back of your PAP device.
5. Dial
**** (four stars), followed by 110#.
The IP address is announced.
6. Write down the IP address.
7. From a PC on the same network as the PAP
device, login to the PAP device Web Interface
by opening your web browser and entering
http://IP address into the address field and
pressing <Enter>.
by opening your web browser and entering
http://IP address into the address field and
pressing <Enter>.
8. Click
the
Admin Login link.