Linear Electronic Access Control Cylindrical Lockset 212LS-C26DCR-LT Leaflet

INSTR,INSTL,212LS - LINEAR FILENAME:

 P1345X11 - INK:

 BLA

CK - MA

TERIAL:

 20 LB

. MEAD BOND - SIZE:

 16.500”

 X 8.250”

 - SCALE:

 1-1 - FOLDING:

 2 FOLD 

VER

TICAL  - SIDE 1 OF 2

Simple to Install  -The DoorGard 212LS Lockset installs in 15 minutes 
and 

programs the same as all DoorGard/IEI keypads. It includes 

all mounting hardware, and easily retrofits into any standard cylindrical 
door prep (ANSI/BHMA A 156.2-2003).  The 212LS has a replaceable 
core, for the manual key override.  The sleek design fits with any décor 
and is available in 26D Stainless and US3 Polished Brass, right or left 
handed crescent door handles.
Right Hand 
212LS – C26DCR-Rt - F/G:DoorGard Grade 2 Lockset/Cylindrical, 
Stainless, Crescent handle, Right handed. 
212LS – CUS3CR-Rt - F/G: DoorGard Grade 2 Lockset/Cylindrical, 
Stainless, Crescent handle, Right handed.
Left Hand
212LS – C26DCR-Lt - F/G: DoorGard Grade 2 Lockset Cylindrical, 
Stainless, Crescent handle, Left handed.
212LS – CUS3CR-Lt - F/G: DoorGard Grade 2 Lockset Cylindrical, 
Stainless, Crescent handle, Left handed.

Easy to Maintain -Change the battery in three minutes. The 212LS 
Lockset uses four (4) 1.5V AA batteries for up to 15,000 uses or up to 
five years. An alarm activates Low Battery Alert allowing for 30 more 
uses. 
User 

Codes - The 212LS lock recognizes up to 120 users with a 

different code for each, and the lockset retains codes without batteries.   
Codes can be one to six digits in length and digits can be repeated.  
The Master Code is always stored in user location one (1). A reset 
button is provided inside the lock which restores factory defaults and 
removes codes already stored. The lockset is equipped with an override 
mechanical key. 

The code toggles to allow passage for an event so any 

key will open the lock.  

Security 

and Protection -The 212LS Lockset is designed with a  

safeguard against forced entry since the outside lever is not 
mechanically connected to the latch until the lock activates.  Also, after 
three invalid code attempts, there is a 20 second lockout period for the 
keypad.   
Rugged 

Design -The 212LS  is designed for both commercial and 

industrial use. 

Features

1.  Spanner wrench
2.  T-Strike Door Latch 

2-3/8” Backset

3.  T-Strike Door Latch 

2-3/4” Backset

4.  Strike Plate
5.  Strike Plate Cover 
6.  Latch/Strikeplate Screws
7.  Allen Wrench
8.  Exterior Door Handle/

keypad

9.  Exterior Gasket
10. Interior Gasket

11. Interior Faceplate/Door 

Handle w/battery case 

12. Interior Faceplate
13. Override Keys (2)
14. Pin Wrench (pries open key 

slot cover)

15. Key Slot Cover 
16. Screws:  2 sets Lock 

Assembly screws (thick, 
thin doors)

17. Sealing Washer 
18. Faceplate Assembly Nut

Lockset Parts List 

Installation Steps

•  Use Pin Wrench (#14) to pull off cover (#15).
•  Use override key (#13).
•  Turn left twice.

•  Remove existing Lock from door
•  If it is new door with no holes, use

 template provi

ded 

•  Measure backset. 

1.  Unpack the lockset and inventory all parts. Remove mount-

ing screws, separate lock assembly, and both interior/exterior  
handle plates and the two rubber gaskets.

2.  Insert the strike plate hole cover (#5) and attach strike plate 

(#4) in the door jam/frame, securing with two Phillips head 
screws.

3.  Install T-Strike Door Latch (#2 or #3) into doorjam/frame and 

secure with two Phillips head screws.

4.  Assemble locks inserting two Rubber Gaskets (#8, 9, 10, 11). 
5.  Thread battery wires through hole in Interior Faceplate/Door 

Handle (#11).

6.  Attach Interior Faceplate/Door Handle (#11) to Exterior Door 

Handle (#8), securing with two short or long assembly screws. 
(#16) 

7.  Insert batteries and connect battery clip.
8.  Secure Interior Faceplate (#12) with clear plastic washer with  

Nut (#17, 18) 

9.  Use spanner wrench (#1) to tighten nut (#15).
10.  Program the system as described in this manual.
11.  Instruct the users on lockset operation.  

P1345