Lexmark X500N User Manual
3
Press
or
repeatedly until Density appears, and then press
.
4
Press
or
repeatedly to adjust the density, and then press
.
5
Press
to return to the Ready state.
Note: Copy density can also be temporarily changed by pressing the Lighter/Darker button on the control panel.
When the printer power is reset, the printer returns to the default settings.
When the printer power is reset, the printer returns to the default settings.
Collating copies
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies
as groups of pages (not collated).
as groups of pages (not collated).
Collated
Not collated
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
From the control panel, press
.
4
Use the keypad to enter the number of copies.
5
Press
.
6
Press
or
repeatedly until Copy Settings appears, and then press
.
7
Press
or
repeatedly until Sort appears, and then press
.
8
Press
or
repeatedly until On appears, and then press
.
9
Press
to return to the Ready state.
10
Press
to start copying in black and white, or press
to start copying in color.
Canceling a copy job
To cancel a copy job, press
at any time.
Note: If the copy job continues to print, part of the job may have already been transmitted to the printer buffer before
the stop command was sent. Cancel Copy Job appears on the display, and the remaining buffered pages are
printed before the job is canceled.
the stop command was sent. Cancel Copy Job appears on the display, and the remaining buffered pages are
printed before the job is canceled.
54