LevelOne FCS-1000 User Manual

 

Initial setup should be performed using the supplied Windows-based setup Wizard. This 
program can locate the LevelOne IP Network Camera even if its IP address is invalid for your 
network. You can then configure the LevelOne IP Network Camera with appropriate TCP/IP 
settings for your LAN.  

Subsequent administration can be performed with your Web browser, as explained in Chapter 
3 - Web-based Administration. 

1.  Insert the supplied CD-ROM into your drive. If the setup program does not start 

automatically, run Netcam_Setup.exe in the root folder. You will see the Welcome screen 
shown below. 

 

2. Click 

the 

Setup button to start the setup Wizard. 

3.  The next screen will list all the LevelOne IP Network Cameras on your LAN. An example 

screen is shown below. 

 

7