LevelOne IP Phone VOI-7011 User Manual
41
LAN Model
The default setting is NAT mode for IP
Phone, and this enables the embedded
NAT router between the LAN port and PC
port. You may change to Bridge Mode if
you need NOT use the embedded NAT
router. When setting to Bridge Mode, the
WAN and the LAN ports will be bridged.
Phone, and this enables the embedded
NAT router between the LAN port and PC
port. You may change to Bridge Mode if
you need NOT use the embedded NAT
router. When setting to Bridge Mode, the
WAN and the LAN ports will be bridged.
IP Type
There are three selections for WAN: Fixed
IP, DHCP Client, and PPPoE modes. This
WAN setting is for the LAN port when set
in NAT mode. The WAN default is at
DHCP Client Mode.
For Fix IP Mode, please make sure the IP
address. Net Mask, Gateway, and DNS
settings are suitable in your current
network environment.
For PPPoE Mode, you have to enter
correct username and password to get the
IP address from your Internet Service
Provider.
IP, DHCP Client, and PPPoE modes. This
WAN setting is for the LAN port when set
in NAT mode. The WAN default is at
DHCP Client Mode.
For Fix IP Mode, please make sure the IP
address. Net Mask, Gateway, and DNS
settings are suitable in your current
network environment.
For PPPoE Mode, you have to enter
correct username and password to get the
IP address from your Internet Service
Provider.