Lenco Marine L-80 USB User Manual

Page of 45
 
11. MOTOR OFF/Reverse BUTTON 
Tap the button to switch Reverse/Forward playback. 
Press the button more than 1sec. to enable motor off, and the led will be flash. Press the button more 
than 1sec again to disable motor off. 
12. 45 RPM ADAPTOR 
Place on center spindle for playing 7” records with large center holes. 
13. TONEARM LEVER 
Controls the up and down action of the tone arm lift. 
14. ANTI-SKATE KNOB 
When a record is playing, a force is generated drawing the stylus towards the center of the record. This 
control compensates for that force and needs to be set to the same value as the counterweight 
pressure ring. 
15. COUNTERWEIGHT 
Use the counterweight to balance the tone arm and to adjust the stylus pressure. 
16. PHONO/LINE OUTPUT 
Connect the turntable to any phono or line level input, using the supplied cinch/cinch cable. Be sure to 
put the phono/line switch in the right position. 
17. AC VOLTAGE SELECTOR 
Make sure the selector is set properly. 
18. POWER SWITCH   
This switch turns the power on or off. 
19. POWER CORD CONNECTOR 
Used to connect the included power cord.