Lenovo S2110A User Manual

Page of 46
Lenovo IdeaTab S2110A Hardware Maintenance Manual
2
Follow these rules below to ensure general safety:
• Observe a good housekeeping in the area where the machines are put during 
and after the maintenance.
• When lifting any heavy object:
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt 
to lift it.
4. Lift it by standing or pushing up with your leg muscles; this action could 
avoid the strain from the muscles in your back. Do not attempt to lift any 
object that weighs more than 16 kg (35 lb) or that you think is too heavy for 
you.
• Do not perform any action that causes hazards to the customer, or that makes 
the machine unsafe.
• Before you start the machine, make sure that other service representatives 
and the customer are not in a hazardous position.
• Place removed covers and other parts in a safe place, keeping them away 
from all personnel, while you are servicing the machine.
• Keep your toolcase away from walk areas so that other people will not trip it 
over.
• Do not wear loose clothing that can be trapped in the moving parts of the 
machine. Make sure that your sleeves are fastened or rolled up above your 
elbows. If your hair is long, fasten it.
• Insert the ends of your necktie or scarf inside clothing or fasten it with the 
nonconductive clip, about 8 centimeters (3 inches) from the end.
• Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for 
your clothing.
Attention:
 Metal objects are good electrical conductors.
• Wear safety glasses when you are hammering, drilling, soldering, cutting 
wire, attaching springs, using solvents, or working in any other conditions 
that may be hazardous to your eyes.
• After service, reinstall all safety shields, guards, labels, and ground wires. 
Replace any safety device that is worn or defective.
• Reinstall all covers correctly before returning the machine to the customer.
• Fan louvers on the machine help to prevent the overheating of internal 
components. Do not obstruct fan louvers or cover them with labels or 
stickers.
General safety