Lanier 5622 User Manual
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information in the Copy Reference before using this machine. It contains im-
portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Operator Safety
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains one
GaAIAs laser diode, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect re-
flected) eye contact with the laser beam might cause serious eye damage. Safety precautions and in-
terlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.
GaAIAs laser diode, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect re-
flected) eye contact with the laser beam might cause serious eye damage. Safety precautions and in-
terlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis
and laser subsystems to the factory or service depot when replacement or the optical subsystem is re-
quired.
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis
and laser subsystems to the factory or service depot when replacement or the optical subsystem is re-
quired.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
might result in hazardous radiation exposure.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
Trademarks
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
Ethernet is a registered trademark of Fuji Xerox Corporation.
Pentium is a registered trademark of Intel Corporation.
MS, Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all right in those marks.
respective companies. We disclaim any and all right in those marks.
•
The product name of Windows
®
95 is Microsoft
®
Windows
®
95.
•
The product name of Windows
®
98 is Microsoft
®
Windows
®
98.
•
The product name of Windows
®
Me is Microsoft
®
Windows
®
Millennium Edition (Windows Me).
•
Product names of Windows
®
2000 are as follows.
Microsoft
®
Windows
®
2000 Professional
Microsoft
®
Windows
®
2000 Server
•
Product names of Windows NT
®
are as follows.
Microsoft
®
Windows NT
®
Server 4.0
Microsoft
®
Windows NT
®
Workstation 4.0