ITT S-DRIVE IM213 User Manual

This is a SAFETY ALERT SYMBOL. When you see this symbol on the controller, pump or in this

manual, look for one of the following signal words and be alert to the potential for personal

injury or property damage. Obey all messages that follow this symbol to avoid injury or death.

Indicates an imminently hazardous situation which, if not avoided, will result in death

or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death

or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury.
Used without a safety alert symbol indicates a potentially hazardous situation which, if

not avoided, could result in property damage.

NOTE

Indicates special instructions which are very important and must be followed.

All operating instructions must be read, understood, and followed by the operating personnel.

Goulds Pumps accepts no liability for damages or operating disorders which are the result of

non-compliance with the operating instructions.

1.  This manual is intended to assist in the installation, operation and repair of the system and must be kept with  

the system.

2.  Installation and maintenance MUST be performed by properly trained and qualified personnel.

3.  Review all instructions and warnings prior to performing any work on the system.

4.  Any safety decals MUST be left on the controller and/or pump system.

5. 

The system MUST be disconnected from the main power supply before attempting any operation  

 

or maintenance on the electrical or mechanical part of the system. Failure to disconnect electrical  

 

power before attempting any operation or maintenance can result in electrical shock, burns or 

 

death.

6.

When in operation, the motor and pump could start unexpectedly and cause serious injury.

Hazardous

voltage

Hazardous

Pressure