iSymphony V1BLUE User Manual





TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE SCAN BE FULLY INSERTED TO PREVENT

BLADE EXPOSURE. TO  PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the product is operated.

2. RETAIN INSTRUCTIONS -The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS - All warnings on the product and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

5. CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  Use

a damp cloth for cleaning.

6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. WATER AND MOISTURE - Do not use this product near water - for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. This appliance shall

not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed

on the apparatus.

8. ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The

product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only

with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product..

Any mounting of the product should follow the manufacturer instructions, and should use a mounting accessory

recommended by the manufacturer. A product and cart combination 

and uneven surfaces may cause the product and cart combination to overturn.

9. VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never

be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in

installation, such as a bookcase or rack, unless proper ventilation is provided or the manufacturer*instructions have been

adhered to.

10. POWER SOURCES - This product should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating-current line plug (a plug

having one blade wider than the other).This plug will fit into the power outlet only one way. This is a safety feature: If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and

the point of exit from the product.

13. NON-USE PERIODS - The power cord of the product should be unplugged from the outlet when left unused for  long

periods of time.

14. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the product, be sure the

antenna or cable system is grounded so as to provide some protection against voltage surges and

built-up static charges.  Article 810 of the National Electrical Code, ANSI/NFPA  70, provides

information with regard to proper grounding of the mast and supporting structure,

location of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode. See Figure 1.

15. LIGHTNING - For added protection for this product during a lightning storm, or when

it is left unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will present damage to the product due to

lightning and power-line surges.

16. POWER LINES -An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or  where it can fall into such power lines or other electric light or power circuits, or where it can fall

into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be fatal.

17. OVERLOADING - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

18. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the

product.

19. SERVICING - Do not attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. DAMAGES REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing to qualified service

personnel under the following conditions.

a) When the power-supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are

covered by the operating instructions as an improving adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore the product to its normal operation.

e) When the product exhibits a distinct change in performance -this indicates a need for service.

21. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or having the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock or other hazards.

22. SAFETY CHECK - Upon completion of any service or repair to this product, ask the service technician to perform

safety checks to determine that the product is in proper operating condition.

23. HEAT - The product should be situated away from heat sources such as radiators, heat registers, stoves or other

products (including amplifiers) that produce heat.

24. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment. Changes or modifications made without written approval may void the user’s

authority to operate this equipment.

CLASS 1 LASER PRODUCT

CAUTION!

HAZARDOUS LASER RADIATION WHEN

OPEN AND INTERLOCK FAILED OR

DEFEATED. AVOID EXPOSURE TO BEAM

Before operation, check if the voltage of the unit is in line with the local voltage.

Hold the plug to disconnect it from the mains outlet. Do not pull the power cord.

When the plug of the unit is connected to the mains outlet, the unit will be still connected to AC even of the power is

turned off.

Disconnect the plug as soon as liquid or objects enter the unit. The unit cannot be used until being checked by

experts.

Do not open the cabinet. Laser rays employed by the unit may damage eyes. Any servicing should be done by

qualified service personnel.

Put the unit where ventilation is good enough to prevent overheating.

Never put the unit in direct sunlight or near heat sources.

Never put the unit in direct sunlight or near heat sources.

To protect the pickup, do not put the unit where there is a lot of dust. If there is dust on the pickup, use a cleaning

disc to clean it. Refer to the operation instructions of the cleaning disc you bought.

The unit is suddenly moved from a cold place to a warm place.

Use of the unit in a humid place.

In these cases, the unit will not work. Unloading the disc and leaving the unit on for about one hour will evaporate the

water, allowing the unit to function normally again.

Use a soft cloth with a little neutral detergent to wipe the cabinet, panel and controls. Never use abrasive paper,

polishing powder or any solvent such as alcohol or gasoline.

Moisture will appear on the pickup lens in the following cases:

The lightning flash with arrow- head 

symbol, within an equilateral triangle is 

intended to alert the user to the presence 

of uninsulated ‘dangerous voltage’ within 

the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of 

electric shock to persons.

The exclamation point within an 

equilateral triangle is intended to 

alert the user to the presence of 

important operating and maintenance 

(servicing) instructions in the literature 

accompanying the appliance.

WARNING: TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT REMOVE COVER

(OR BACK), NO USER SERVICEABLE PARTS

INSIDE REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

should be moved with care-quick stops, excessive force

grounding of the lead -in wire to an antenna discharge unit, size of grounding conductors,