iStarUSA T-35K25-SA User Manual

Carefully insert the T-35K25-SA HDD cage into the bay 

and push it inward until the T-35K25-SA HDD cage’s screw 

hole is aligned with hole of the bay.

T-35K25-SA

3.Secure the T-35K25-SA

   HDD cage is packed with 

   screws,use 2 screws on each 

   side to securely hold the device.

1. Do not eject the HDD while it is busy

2. Carefully take the HDD out from T-35K25-SA HDD cage.

    The HDD can reach temperatures over 50    . It will not 

    burn the fingers but should be handled with care.

T-35K25-SA HDD cage

T-35K25-SA

2

Lock

Easy latch door

1. Triangular lock, unlock with the key (counter-clockwise rotated 90 degrees), 

     open the panel;

Triangular lock unlock with the key  

(counter-clockwise rotated 90 degrees),

1. Use the key “Counter-clockwise 90°” to open the door.

2. Take the HDD out from HDD cage, and firmly close the front 

    door .use the key “Clockwise 90°”to lock the door .

:

:

The contents of user’s manual are protected under copyright 

law. Any organization or individual can not make copy and save 

it in the information bank or the retrieval system by any method 

or form without the authorization of iStarUSA.

T-35K25-SA is not responsible for any loss in the process of using 

the HDD cage.

1 x 3.5" to 1 x 2.5" HDD Hotswap Trayless Drive Cage

III

/ 32º~131ºF

101.6

6

pcs

pcs

pcs

pcs

pcs

pcs

cage

1. Be sure to connect the 4P LED wire, or the LED indicator 

    will not be lighted up.

2. Before connecting the SATA data cable & SATA+4PLED  

    cable with the PC or with T-35K25-SA HDD cage, please 

    check there is no object on or beside the terminals that 

    may effect the mechanical assembly or become a 

    possible source of an electrical short.

1. Insert the SATA 15P connector into the T-35K25-SA’s 15P 

    connector, connect the big power 4P connector to the PC’s 

    4P power plug, and the small 4P LED wire connector to the 

    4P LED port at the back of T-35K25-SA.

2. Insert one end of the SATA data cable to T-35K25-SA,another

    end(7P) to either the mother board or the SATA RAID card.