IntraServer Technology ITI-90-100250 User Manual

ITHPS<n>: ddi_dma_buf_bind_handle: DDI_DMA_INUSE impossible

ITHPS<n>: ddi_dma_buf_bind_handle: xxh unknown/impossible

ITHPS<n>: ddi_dma_unbind_handle: failed

The operating system failed to respond to the named routine in a
known manner. This is a fatal error that is not recoverable. Please
report this error to technical support.

ITHPS<n>: No KeyROM found.  Hardware contains no valid license

The adapter is not a valid IntraServer adapter licensed for use with
Solaris.

ITHPS<n>: Device in a slave-only slot and is unusable

ITHPS<n>: Hi-level interrupts not supported

The adapter is in a slot that can not be used with this driver. Please
try moving the adapter to a different PCI slot.

ITHPS<n>: Failed to attach. This adapter will not be installed.

Because of one of the previous two errors, this adapter could not be
"attached" to the I/O subsystem and will not be accessable.  See
the previous error message and solve that problem.

ITHPS<n>: Unable to obtain soft state structure

The driver was unable to initialize a required data structure and
therefore did not load.  Please call technical support.

ITHPS<n>: Failed to attach interrupt handler

The driver was unable to initialize the interrupt handler as required.
Please call technical support.

ITHPS<n>: The adapter is malfunctioning

ITHPS<n>: The adapter is malfunctioning or is of an unknown type

The driver is not able to communicate with the hardware. You may
need to update your driver or your hardware.

ITHPS<n>: Failed to create minor node required for DMI interface

The driver was unable to create an entry point for the DMI device
driver.  If you are not using the DMI device driver then you may
safely ignore this message.

ITHPS<n>: Could not attach to the SCSI subsystem