IntraServer Technology ITIpci 5100G/GF User Manual
LSI Logic Corporation
Page 22 of 56
5100G Cable Connection
The 5100G adapter has one RJ-45 connector used for attaching the server to
an Ethernet twisted pair copper segment. The port is auto-negotiating and
supports full-duplex operation.
an Ethernet twisted pair copper segment. The port is auto-negotiating and
supports full-duplex operation.
1. Prepare an appropriate cable.
The following table lists cable characteristics required for connecting to
10/100/100 Base-T ports:
10/100/100 Base-T ports:
10/100/1000BASE-T Cable Specifications
Port Type
Connector
Media
Maximum
Distance
10Base-T RJ-45 Cat. 3, 4 or 5 UTP 100 Meters
100/1000Base-T RJ-45
100/1000Base-T RJ-45
Cat. 5 UTP
100 Meters
Table 7: 10/100/1000BASE-T Cable Specifications
2. Connect one end of the cable to the ITI-5100G/GF adapter.
3. Connect the other end of the cable to a Gigabit Ethernet network port.
Note: The adapter port LEDs are not functional (they will not reflect
port link or data status) until the adapter driver software is installed.
port link or data status) until the adapter driver software is installed.