Intermec 700 User Manual
Network Support
—
Chapter 4
141
700 Series Color Mobile Computer User’s Manual
CDMA WAN Monitor - General
CDMA WAN Monitor - Details
WAN Monitor — Details
Below are descriptions and meanings for each piece of information pro-
vided via the Details tab. Most of this is similar to what is shown under
the General tab. Note that the information is listed alphabetically.
vided via the Details tab. Most of this is similar to what is shown under
the General tab. Note that the information is listed alphabetically.
ESN
Lists the Electronic Serial Number (ESN) assigned to this radio module or “Unavailable” if a num-
ber cannot be read from the radio. This number is required for activation. You must provide this
number to your service provider, such as Sprint, Verizon, Bell Mobility, etc., for activation. Note
that both the hex version and the decimal version of your ESN is provided.
ber cannot be read from the radio. This number is required for activation. You must provide this
number to your service provider, such as Sprint, Verizon, Bell Mobility, etc., for activation. Note
that both the hex version and the decimal version of your ESN is provided.
Firmware Rev
Identifies the firmware version, if available.
Firmware Type
Identifies the type of firmware installed in the WAN radio module. It should match the carrier
you are using as your network provider.
you are using as your network provider.
Hardware Rev
Identifies the hardware revision of the WAN radio module installed in your unit.
IMSI/MIN
Shows the IMSI (International Mobile Subscriber Identity) number assigned to the Subscriber
Identity Module (SIM) card installed in this 760 Computer.
Identity Module (SIM) card installed in this 760 Computer.
Manufacturer
Lists the name of the manufacturer that developed this radio module, such as “Sierra Wireless.”
MDN
Shows the MDN (Mobile Directory Number) or DN (Directory Number) — the number that
identifies the account tied to your device. You can consider this the “phone number.” Note that
the MDN and IMSI/MIN numbers can be the same.
identifies the account tied to your device. You can consider this the “phone number.” Note that
the MDN and IMSI/MIN numbers can be the same.
Model
Lists the product name for this radio module, such as “Model 72.”
Phone Number
Identifies the telephone assigned to the WAN radio module.
PRI Version
Provides the version number of the Preferred Roaming List (PRL).
Radio Temp
Identifies the temperature of the radio module, or lists “Unavailable degrees” if no information or
temperature cannot be measured.
temperature cannot be measured.
Rx
(abbreviation for receive) Indicates the number of bytes received over the WAN connection since
the CORE WAN Module was started.
the CORE WAN Module was started.
Tx
(abbreviation for transmit) Indicates the number of bytes received over the WAN connection since
the CORE WAN Module was started.
the CORE WAN Module was started.