Insignia NS-14T002 Owner's Manual
30
NS-14T002 Insignia Flex™ Android Tablet
www.insigniaproducts.com
5 Touch Connect to connect to the wireless access point. If the
connection is successful, the connected icon appears in the upper
right corner of the screen.
right corner of the screen.
Adding a Wi-Fi network
To add a Wi-Fi network:
1 Touch the
1 Touch the
(home) icon, touch the
(applications) icon, then
touch the
(settings) icon. The Settings screen opens.
2 Slide the Wi-Fi switch to the ON position. A list of available networks
opens. Secured networks are indicated with a Lock icon.
3 Touch + at the top right corner of the screen.
4 Use the on-screen keyboard to enter the network SSID, then touch the
security type you want to use. You can select:
•
None—No security.
•
WEP—Wired Equivalent Privacy. Note: A passphrase is required.
•
WPA/WPA2 PSK—Wi-Fi Protected Access. Note: A password is
required.
required.
•
802.1 x EAP—802.1x Extensible Authentication Protocol.
Note: If you are not sure which security type to select, refer to your
network setup documentation.
network setup documentation.
NS-14T002_13-0622_MAN_V1_ENG.fm Page 30 Friday, October 11, 2013 3:02 PM