Insignia NS-PCS20 Quick Setup Guide

Quick Setup Guide  I  NS-PCS20 2.0 computer speakers

Congratulations on your purchase of a 
high-quality Insignia product. Your 
NS-PCS20 is designed for reliable and 
trouble-free performance.

•  Stereo speakers (2)

• AC adapter

•  Quick Setup Guide

1 Power 

button

2 Headphone 

output jack

3 Master 

volume 

control

Press to turn on your speaker 
system. Press again to turn off 
your speaker system.

Connect your favorite 
headphones to this jack. They 
will mute the speaker system 
automatically. The master 
volume control can then be 
used to turn up or down the 
volume to your headphones.

Rotate clockwise to turn the 
volume up or 
counterclockwise to turn the 
volume down.

•  Place the speakers on the opposite sides of the 

device they are connected to and as far apart as 
possible.

1  Make sure that the computer and your speaker 

system are turned off and unplugged from the 
power outlet.

2  Plug the cable with the green plug on the right 

speaker into the audio out jack on the computer 
(this jack is usually green).

3  Plug the black plug from the AC adapter into the 

back of the right speaker and the other end into a 
wall outlet or power strip.

4  Turn on the computer and your speaker system.

1  Make sure the portable audio device and your 

speaker system are turned off and unplugged.

2  Plug the green audio cable attached to the speaker 

into your audio device.

3  Plug the black plug from the AC adapter into the 

back of the right speaker and the other end into a 
wall outlet or power strip.

4  Turn on the portable audio device and your 

speaker system.

Before using your new product, please read these 

instructions to prevent any damage.