Insignia NS-R5101 User Manual
22
Insignia NS-R5101 5.1 Surround Sound A/V Receiver
www.insignia-products.com
To adjust the sound parameters:
1 Press the SOUND PARAMETER button.
2 Press the select
or
buttons to select the
parameter.
3 Press the select
or buttons to adjust the
parameter.
4 Repeat the above procedure to adjust the
other parameters.
Adjusting each channel level with test tone
The volume level of each channel can be
adjusted easily with the test tone function.
adjusted easily with the test tone function.
To adjust each channel level:
1 Press the TEST button.
The test tone mode is displayed and is heard
from each channel’s speaker for two seconds
as follows:
from each channel’s speaker for two seconds
as follows:
•
FL—Front Left
•
C—Center
•
FR—Front Right
•
SR—Surround Right
•
SL—Surround Left
•
SW—Subwoofer
2 At each channel, press the select
or
buttons to adjust the level as desired until the
sound level of each speaker sounds equally
loud.
sound level of each speaker sounds equally
loud.
3 Press TEST to cancel the test tone function.
Using the remote control
Using the buttons
Note
When the SPEAKER button is set to off, the test
tone function does not work.
tone function does not work.
Note
When the speaker setting is “N (NONE)”, the test
tone of the corresponding channel is not available.
tone of the corresponding channel is not available.
Item Description
For more information, see...
1
STANDBY button
2
SLEEP button
3
DIMMER button
4
VOLUME
/
buttons
5
MUTE button
6
CHANNEL LEVEL
button
button
7
SETUP button
8
MEMORY/ENTER
button
button
9
SELECT
button
10
Surround mode </>
buttons
buttons