Intel raid controller srcsas144e User Manual

2

• Support for up to 32 SAS or SATA drives and 40 logical drives.
• PCI Express* connector that fits into a x8 PCI Express slot capable of 2.5 Gbps per 

lane over PCI Express x1, or x4. 

• 3.0 Gbps point-to-point transfer rate.
• Both a standard and a low-profile bracket.

The SAS controller supports the ANSI Serial Attached SCSI (SAS) standard, version 1.0. 

In addition, the controller supports the Serial ATA (SATA) protocol defined by the Serial 

ATA specification, version 1.0a.T he SAS controller is a versatile controller that 

supporting both the SAS and SATA interfaces and provides the backbone of both server 

and high-end workstation environments. 

Protocols supported include:

• Serial SCSI Protocol (SSP): Communication with other SAS devices.
• SATA II Protocol: Communication with other SATA II devices.
• Serial Management Protocol (SMP): Topology management information sharing with 

expanders.

• Serial Tunneling Protocol (STP) support for SATA II through expander interfaces.

• Smaller, thinner cabling with serial point-to-point 3.0 Gbps data transfer rates.
• Allows mixed connections to SAS or SATA targets.
• Support for non disk devices and mixed capacity drives.
• Support for intelligent XOR RAID levels 0, 1, 5, 10, and 50.
• Dedicated or global hot spare with auto rebuild if an array drive fails.
• User defined stripe size per drive (8, 16, 32, 64 (def), or 128 KB).
• Advanced array configuration and management utilities that provide: 

— Online Capacity Expansion (OCE) adds space to existing drive or new drive.
— Online RAID level migration (upgrade of RAID mode, may require OCE).
— Drive migration.
— Drive roaming.
— No reboot necessary after expansion.

• An upgradeable Flash ROM interface.
• Allows for staggered spin up, hot plug, lower power consumption.