Intel Model Vehicle MPRTM0020 User Manual
Intel NetStructure
®
MPRTM0020 Technical Product Specification
– April 2006
41
Certifications
Certifications
9
Safety:
•
IEC60950-1
•
EN60950
•
UL/CSA 60950-1
Hazardous substances:
•
The Intel NetStructure
®
MPRTM0020S00Q has been verified to be compliant with the
European Directive 2002/95/EC, officially titled “The Restriction on the Use of Hazardous
Substances (RoHS) in Electrical and Electronic Equipment” or RoHS. Specifically, this
product uses only RoHS compliant parts and Pb-free solder and may take advantage of certain
exemptions referenced within the Directive.
Substances (RoHS) in Electrical and Electronic Equipment” or RoHS. Specifically, this
product uses only RoHS compliant parts and Pb-free solder and may take advantage of certain
exemptions referenced within the Directive.
Electromagnetic Compatibility (EMC) emissions:
•
CISPR22/EN55022 Class A
•
EN300386
•
FCC Rules CFR 47 Part 15B Class A
•
ICES-003 Class A
Electromagnetic Compatibility (EMC) immunity:
•
CISPR24/EN55024
•
EN300386
Network Equipment Building System (NEBS) compliance:
•
The MPCBL0020 SBC meets the board-level specifications as specified in the Intel
Environmental Standards Handbook – Telco Specification Document No. A78805-01. The test
methodology is a combination of Intel and NEBS test requirements with the intent that the
product will pass pure system-level NEBS testing. Intel has performed limited NEBs testing.
Among these are GR-1089-CORE: ESD, radiated emissions (E- and H-field), conducted
emissions, radiated immunity, and conducted immunity.
Environmental Standards Handbook – Telco Specification Document No. A78805-01. The test
methodology is a combination of Intel and NEBS test requirements with the intent that the
product will pass pure system-level NEBS testing. Intel has performed limited NEBs testing.
Among these are GR-1089-CORE: ESD, radiated emissions (E- and H-field), conducted
emissions, radiated immunity, and conducted immunity.
Telecom Compliance of T1/E1 Ports:
•
The T1/E1 ports of the MPRTM0020 have not been tested for compliance against any
telecommunications standards. It is the responsibility of the final integrator to obtain telecom
attachment approvals for their combination of PMC and RTM T1/E1 configuration.
telecommunications standards. It is the responsibility of the final integrator to obtain telecom
attachment approvals for their combination of PMC and RTM T1/E1 configuration.