Infocus DV 14DL User Guide

English

13. For drilling into brick <DV14DL>

CAUTION:

●

When the Cordlless hammer drill is used continuously, the body may be heated. If this
happens, leave the Cordlless hammer drill to cool.

●

Excessive pressing force never increases drilling speed. It will not only damage the
drill tip or reduce working efficiency, but could also shorten the service life of drill bit.
Operate Cordlless hammer drill within 20 – 30 lbs. (10 – 15 kg) pressing force while
drilling into brick.

Work

Cap position

Suggestions

Brick

Use for drilling purpose.

Wood

Drilling

Steel

Use for drilling purpose.

Aluminum

Screw

Small

1 – 22

Use the bit and socket matching the screw

tightening

screw

diameter.

Wood

1 –

Use after drilling a pilot hole.

screw

THE SCOPE AND SUGGESTIONS FOR USES

Table 4 <DV14DL>

Table 5 <DS14DL>

CAUTION:

●

While operating the Cordless hammer drill, take care not to lock the motor.
If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.

●

Do not tighten too strongly as the screw heads will be damaged.

●

To extend the lifetime, the lithium-ion battery equips with the protection function to
stop the output. Therefore, when used as a drill, if the tool is overloaded, the motor
may stop. However, this is not the trouble but the result of protection function. In this
case, release the switch of tool and eliminate the causes of overloading.

Work

Cap position

Suggestions

Wood

Drilling

Steel

Use for drilling purpose.

Aluminum

Screw

Small

1 – 22

Use the bit and socket matching the screw

tightening

screw

diameter.

Wood

1 –

Use after drilling a pilot hole.

screw