Ingenico 6500 User Manual
42
Chapter 6 System Parameters Menu
Section 6.4 Setting Up the Port
6.4.6
Defining the LAN Address
Display
Action
To access the extended menu, restart the terminal
by pressing [1] + [CAN] + [OK]; while the terminal
is starting up, access the extended menu by
pressing the [1] and [3] keys simultaneously.
Extended Menu
Serialnum Inject
System Config
System Info
System Config
System Info
Supervisor Menu
Press [ ], [ ], [ ], [Enter] to select Supervisor
Menu.
Enter Password:
Key password [2] [6] [3] [4], then press [Enter].
Supervisor Menu
Change Password
Application File
Security
Application File
Security
Sys Parameters
Press [ ], [ ], [ ], [Enter] to select Sys
Parameters.
Sys Parameters
Download Method
Download Port
Download Port
Setup Port
Press [ ], [ ], [Enter] to select Setup Port.
Setup Port
Port1
Port2
Port2
Select Port1 or Port2.
(By default, Port 1 = Host, Port 2 = Aux.)
(By default, Port 1 = Host, Port 2 = Aux.)
Port X
Interface Type
Baud Rate
Data Bits
Stop Bits
Parity
Baud Rate
Data Bits
Stop Bits
Parity
LAN Address
Press [ ], [ ], [ ], [ ], [Enter] to select LAN
Address.
LAN Address
Old Value: 104
Enter New Value:
Enter New Value:
Key the appropriate LAN address, then press
[Enter].