IFB Appliances Digital 7kg User Manual

Page of 33
Part 5:     Care and maintenance
To  clean  the  detergent  residues,  remove  the  detergent  dispenser
from its place by pressing on the area marked on siphon. Wash the
dispenser with water and also clean the dispencer housing before
inserting the dispenser to its place.
Clean  the  siphon  (coloured  piece  in  the  dispenser)  every  30-40
washes.  Pull  out  the  siphon  by  holding  from  its  edges.  To  prevent
clogging, clean the softener residues thoroughly and make sure that
the siphon fits into its place completely before any operation.
At the end of the water intake connection module and water inlet
hose-tap  side,  there  exists  filters. These  filters  prevent  any  dirt
and objects passing into the machine. It is advisable that these
filters should be cleaned every 30-40 washes. To clean the filter,
first  turn  the  tap  off.  Then,  disconnect  the  hose  and  clean  the
filter  with  thin  brush.  If  the  filter  is  very  dirty,  you  may  clean  it
by pulling out with pliers. To clean the filter at the tap side of the
hose, pull it out by hand and clean the filter under the tap water.
To prevent any leakage, have a technician to control the hoses
every  two  years.  If  the  machine  is  placed  at  cold  ambient
temperatures, the water remaining inside the pump and hoses
should  be  removed  from  the  filters. Also  to  prevent  freezing,
empty the water intake hoses by disconnecting from taps.
Do  not  leave  any  metal  objects  (pins,needles,etc.)inside  the
drum. These objects may cause rust on the drum surface. Do not
clean the drum with scratching elements.
Detergent dispenser
Siphon
Water intake filter
Hose
Drum
14