IGo Direct 60 User Manual

 
When the Stowaway keyboard is no longer needed, you may disable the 
keyboard driver by pressing the Options button. The BT Disabled 
message will then be displayed on the Status page. 
 

NOTE: Disabling the Bluetooth keyboard will not automatically turn off the 
Bluetooth radio. Turning the Bluetooth radio off from Connectivity > 
Bluetooth while the keyboard driver is still enabled will prompt with Active 
Bluetooth connection. Switch off anyway? The Bluetooth keyboard will 
remain in waiting mode until Bluetooth is turned back on. If you have 
attempted keystrokes and the Bluetooth radio is turned back on prior to the 
keyboard timing out, the keyboard will immediately enable. 

 
To re-enable the connection, press the Options button on the Status tab. 
See 

 for complete instructions. 

 
 
 
 
 

 
When a secure connection is established, the paired devices share a 
permanent security bond. This bond is established when two devices create 
and exchange a Link Key, this process is also known as pairing. Link Keys 
are based on a unique Bluetooth Device Address, an internally generated 
random number and a user defined Passkey. 
 
With a Bluetooth connection, transmissions may be intercepted. In order to 
limit this exposure, a secure connection should be set up. This encrypts data 
sent from the keyboard to the mobile device. This means that there is a 1:1 
relationship between the mobile device and the keyboard and it will not 
respond to connection requests from other devices. The mobile device on the 
other hand, will retain the ability to create new pairings with other devices. 
 
The mobile device searches the Bluetooth radio band until it finds the 
keyboard. If the Options tab > Bluetooth security option is On, it will 
prompt for a Passkey. Once paired, each time the mobile device and 
keyboard are powered on within range of each other, the devices will be 
reconnected. Some Bluetooth settings can affect auto-reconnection. See the 

section entitled: 

.