IGo Direct 60 User Manual

6.  If the Passkey is entered successfully on both 

devices, the message BT Keyboard 
Connected will appear on the Status tab. If 
the keyboard does not show up as connected: 

a.  Press the <Ctrl> <

> 

keys together on the keyboard again. 

b.  Or, power cycle the keyboard (close and 

reopen), then press <Ctrl> <

>.  

c.  Or, check that the 

Red LED

 on the 

keyboard is not lit after a power cycle, 
indicating a dead battery condition. 

 
 
 
 
 

 

 
7.  If the passkey is not entered correctly, the 

connection will fail. In this case you will need to 
repeat steps 2-5 from above. 

 

     

NOTE: Please, make sure that the passkey is 
entered on your mobile device first, press OK 
and then follow with the passkey on the 
keyboard. When finished, press the <Enter> 
key on the keyboard. 

 
 
 
 
 

 
 

 
 
1.   If you chose an Unsecured connection by 

selecting Off at the Options tab > Bluetooth 
security option, connection is usually 
established within a few seconds after pressing 
<Ctrl> <

>. If the 

connection is not completed, press the <Ctrl> 
<

> keys together again.