ICOM MR-1000R User Manual
11
4
BASIC OPERATION
■ IR function
Radar interference may appear when another ship’s
radar is operating on the same frequency band in
close proximity. The IR function can eliminate this type
of interference. (p. 6)
radar is operating on the same frequency band in
close proximity. The IR function can eliminate this type
of interference. (p. 6)
q Push [MENU]/[
] to call up VIDEO menu.
w Push [Ú] until the “IR” section becomes highlighted.
e Push [Ω ≈] to select IR function 1, 2 or OFF.
e Push [Ω ≈] to select IR function 1, 2 or OFF.
• “IR” appears in the upper right of the screen, when the
function is activated.
■ STRETCH function
The blips can be magnified electronically for easier
viewing of small targets. (p. 6)
viewing of small targets. (p. 6)
q Push [MENU]/[
] to open the VIDEO menu.
w Push [Ú] to select “STRETCH”, then push [
≈
] to
turn the function ON.
■ ZOOM function
The ZOOM function expands the target to two times
normal size.
normal size.
• This function is available up to a 24 NM range or shorter ex-
cept
1
⁄
8
NM.
q Push [Ù Ú
Ω ≈
] to move the cursor to the desired
target.
w Push [TARGET]/[
] and [TRAILS]/[
] si-
multaneously to toggle the ZOOM function ON and
OFF.
OFF.
• “ZOOM” appears in the lower right of the screen.
With ZOOM function ON
Normal screen
NOTE: Turn OFF this function during normal opera-
tion.
With STRETCH ON
Normal screen
With IR function ON
Radar interference
MR-1000R2_T2.qxd 04.2.24 10:22 Page 11