ICOM AP-12 User Manual
39
4
AP-12 MANAGER
4
Select the desired WEP key number for data encryp-
tion.
tion.
(default:1)
The desired key number can be selected between the
AP-12 and another AP-12 or terminal.
A key, generated by the key generator, is displayed in
the text boxes. However, the desired keys in hexa-
decimal numbers can be entered into the text boxes
directly when no key generator is set.
The lower 40-bit (10 hexadecimal numbers) or the
lower 104-bit (26 hexadecimal numbers) can be
entered when 64 bits or 128 bits is selected, respec-
tively.
- No key generator is displayed when the desired key
AP-12 and another AP-12 or terminal.
A key, generated by the key generator, is displayed in
the text boxes. However, the desired keys in hexa-
decimal numbers can be entered into the text boxes
directly when no key generator is set.
The lower 40-bit (10 hexadecimal numbers) or the
lower 104-bit (26 hexadecimal numbers) can be
entered when 64 bits or 128 bits is selected, respec-
tively.
- No key generator is displayed when the desired key
is entered into the key text boxes directly.
- The same key content should be entered into the key
number that is selected for another AP-12 or termi-
nal, as shown in the example 1 and 2.
nal, as shown in the example 1 and 2.
No communication is made when different contents
are entered into the key number that is selected for
another AP-12 or terminal, as shown in the example
3.
are entered into the key number that is selected for
another AP-12 or terminal, as shown in the example
3.
e Wep keys …………
Two-way communication
enable
Communication disable
Example 1
Example 3
Example 2
D
D WEP Key Setting Examples– 64-bit encryption
Two-way communication
enable
NOTE: Above screens shows the condition before clicking <Apply>.
The display returns to “00 00 00 00 00” after clicking <Apply>.
AP-12_USA 02.7.26 9:32 AM Page 39 (1,1)