ICOM AP-12 User Manual

48

SETTING EXAMPLE

5

5-3 Bridge mode B (Client Mode)

Set the AP-12 and the PC as
in the network shown at right.

• IP address of the PC should

already be set. (See Chapter
2 or 3)

• See Chapter 4 (p. 31) for

[AP-12 Manager] details.

• Follow the instruction manu-

al of the printer server when
connecting to the AP-12.
(Usually, a crossover cable
is used.)

Set the following item in [AP-12 Manager] Settings screen. (p. 33)
• ESS ID:

Set the same ID.
- Check the “Auto Rate Fallback” (“

✓” is appears) when communication is unstable.

Set the following items in [AP-12 Manager] Settings screen. (p. 34)
• Functional mode:

Select “Bridge Mode B.”

Set the AP-12 (3)’s MAC address, “00-90-C7-27-00-01,” prior to communication
with the AP-12 (3).

Set the following items in [AP-12 Manager] Settings screen. (pgs. 33, 34)
• Channel:

Select the desired channel.
- Set the channel at least four channels apart to avoid interference if another AP-

12(s), operating on an other channel(s), are within the transmission area. (p. 35)

Select “Access Point.”
- AP-12 must be used for the access point when other AP-12s (AP-12 (1) and (2),

in this case) are used in “Bridge Mode B.”

AP-12 (2)

AP-12 (3)

AP-12 (1)

HUB

Printer

Printer server

To LAN

wireless LAN
terminal

wired terminal

wired terminal

Example
00-90-C7-27-00-01

AP-12_USA  02.7.26 9:32 AM  Page 48 (1,1)