ICOM iV85-T User Manual

32

7

■

The transceiver has 16 DTMF memory channels (d0 to dF)
for storage of often-used DTMF code sequence of up to 24
digits. DTMF memories are used to store phone numbers or
control codes.

q Push 

, then push 

(0) to enter 

OPTION SET MODE

.

• Rotate 

to select “dtm.OF,” if necessary.

w Push and hold 

(0) for 1 sec. to select the DTMF mem-

ory.

• One of “d0” to “dF” appears.

e Rotate 

to select the desired DTMF memory.

r Push and hold 

(0) for 1 sec. to enter the DTMF pro-

gramming mode.

• “_ _ _ _ _” appears.
• Programmed memories can be cleared in this way.

t Enter the desired DTMF code sequence by pushing the

digit keys, 

, 

, 

, 

, 

and 

✱

, in the desired

sequence.

• A maximum of 24 digits can be input.
•

✱

enters tone “E”, 

enters tone “F.”

• If a digit is mistakenly input, push 

or 

momentarily

then repeat from step q.

y Push 

or 

to save the digits and exit the DTMF

programming mode.

• Programmed DTMF code sequence sounds when 

is

pushed.

• Or after 24th digit is input, the transceiver automatically saves

the digits and returns to step w.

Push

for 1 sec.

Push

for 1 sec.

Push