Manualsbrain.com
  1. Manuals
  2. Brands
  3. Hotbrick
  4. Dual WAN Firewall Router VPN 800/2
  5. User Manual

Hotbrick Dual WAN Firewall Router VPN 800/2 User Manual

Download
Page of 90
HotBrick Network Solutions 
Rear Panel VPN 800/2 Firewall Router 
 
Figure 1-3: Rear Panel VPN 800/2 Firewall Router 
 
AC power socket 
Connect the supplied power here. 
 
 
Default Settings 
When the VPN 800/2 Firewall Router has finished booting, all configuration settings will be set to 
the factory defaults, including: 
•  IP Address set to its default value of 192.168.1.1, with a Network Mask of 255.255.255.0 
•  DHCP Server is enabled 
•  User Name: admin 
•  Password cleared (no password) 
TFTP Download 
This setting should be used only if your VPN 800/2 Firewall Router is unusable, and you wish to 
restore it by downloading new firmware. Follow this procedure: 
1.  Power On the VPN 800/2 Firewall Router. 
2.  Use the supplied Windows utility or a TFTP client program applies the new firmware. If using the 
supplied Windows TFTP program, the screen will look like the following example. 
 
Figure 1-4: Windows TFTP utility VPN F 800/2 Firewall Router 
 
•  Enter the name of the firmware upgrade file on your PC, or click the "Browse" button to locate 
the file. 
•  Enter the LAN IP address of the VPN 800/2 Firewall Router in the "Server IP" field. 
•  Click "Download" to send the file to the VPN 800/2 Firewall Router. 
3.  When downloading is finished. It should then work normally, using the default settings. 
Page 6