Hotbrick VPN 800 / 2 User Manual
HotBrick Network Solutions
Other Features
• 8-Port Switching Hub
The VPN 800/2 Firewall Router incorporates with 8-port 10 /100BaseT switching hub, making it
easy to create or extend your LAN.
easy to create or extend your LAN.
• DHCP Server Support
Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and other devices
upon request. The VPN 800/2 Firewall Router acts as a DHCP Server for devices on your local
LAN.
upon request. The VPN 800/2 Firewall Router acts as a DHCP Server for devices on your local
LAN.
• Multi Segment LAN Support
LANs containing one or more segments are supported, via the VPN 800/2 Firewall Router's built-
in static routing table.
in static routing table.
• ARP proxy
The ARP proxy feature allows you to assign an external (Internet) IP address to the VPN 800/2
Firewall Router's LAN port. This allows Servers on your LAN to have external (Internet) IP
addresses.
Firewall Router's LAN port. This allows Servers on your LAN to have external (Internet) IP
addresses.
• Easy Setup
Use your favorite WEB browser for configuration.
• Remote Management
The VPN 800/2 Firewall Router can be managed from any PC on your LAN. And, if the Internet
connection exists, it can also (optionally) be configured via the Internet.
connection exists, it can also (optionally) be configured via the Internet.
• Password - protected Configuration
Optional password protection is provided to prevent unauthorized users from modifying the
configuration data and settings.
configuration data and settings.
• HTTP Firmware Upgrade and backup
The web management feature allows you to use HTTP upgrade new firmware and backup
system configuration from local or even from remote site. As long as you enable “Remote
upgrade” and “Remote web-based setup” from Advanced feature web page.
system configuration from local or even from remote site. As long as you enable “Remote
upgrade” and “Remote web-based setup” from Advanced feature web page.
• Email Alert
It will send a warning email to the system administrator, if one of the WAN ports was
disconnected when both WAN ports are enabled.
disconnected when both WAN ports are enabled.
• Syslog
It can generate real time system information on the web page or a particular machine. It is useful
to monitor the device.
to monitor the device.
• QoS Configuration.
This function will make some specified packets with higher priority for pass-through. Especially
you use real-time applications like Internet phone, videoconference, etc.
you use real-time applications like Internet phone, videoconference, etc.
• UPnP
To “Enable” UpnP (Universal Plug & Play), the load balancer will become one of the network
devices. It is useful to discovery and control network devices, such as Internet gateway.
devices. It is useful to discovery and control network devices, such as Internet gateway.
Page 3