Hotbrick LoadBalancer LB-2 User Manual

HotBrick Network Solutions 

The screen is required in order to use multiple PPPoE sessions on the same WAN port.  

It can also be used to manually connect or disconnect a PPPoE session. 

 

 

Select the desired Port and Session, then click the "Select" button. The data 
for the selected Port/Session will then be displayed in the WAN IP Account 
section. 

•  User Name – Enter the PPPoE user name assigned by your ISP. 
•  Password – Enter the PPPoE password assigned by your ISP. 
•  Verify Password – Re-enter the PPPoE password assigned by your ISP.
•  IP Address – If you have a fixed IP address, enter if here. Otherwise, this 

field should be left at 0.0.0.0. 

•  Host Name – This field is used by a Host to uniquely associate an access 

concentrator to a particular Host request. 

Use the "Connect" and "Disconnect" buttons to establish or terminate a 
connection on this session, if required. 

This displays the current connection status for each session. 

 

 

23