Hotbrick LoadBalancer LB-2 User Manual

HotBrick Network Solutions 

Use this to Enable/Disable the Dynamic DNS feature, and select the required 
service provider. 

•  Disable – Dynamic DNS is not used. 
•  TZO – Select this to use the TZO service (www.tzo.com). You must configure 

the TZO section of this screen. 

•  Standard Client – Select this to use the standard service (from 

www.dyndns.org or other provider). You must configure the Standard Client 
section of this screen. 

•  3322(in China) – This is available in China. It is similar to “Standard client” 

•  Select the WAN port on which the Dynamic DNS is used. 
•  The "Force Update" button will update your record on the Dynamic DNS 

Server immediately. 

If you have registered for this service, complete these fields. 

•  Key – Enter your Key, as recorded on the TZO Web site. 
•  E-mail – Enter your E-mail address, as recorded on the TZO Web site. 
•  Domain – Enter the domain name allocated to you by TZO. 

If you have registered for this service, complete these fields. 

•  User Name – Enter the user name recorded by the service provider. 
•  Password – Enter the password recorded by the service provider. 
•  Verity Password – Re-enter the password above. 
•  Server – Enter the name or IP address of the service provider's Server. 
•  Host Name - Enter the domain name allocated to you by the service provider.

These options are available if using the standard client. 

•  Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain 

name) will also be forwarded to you. 

•  Enable backup MX – If enabled, you must enter the Mail Exchanger address 

below. 

•  Mail Exchanger – If the setting above is enabled, enter the address of the 

backup Mail Exchanger. 

 

 

35