Hotbrick LoadBalancer LB-2 User Manual
HotBrick Network Solutions
Data – System Status
WAN
Information
Information
• Connection Status – Current status – either "Connected" or "Not connected".
• Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE,
• Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE,
or PPTP.
• "Force Renew" button– Only available if using a dynamic IP address
(DHCP). Clicking this button will perform a DHCP "Renew" transaction with
the ISP's DHCP server. This will extend the period for which the current WAN
IP address is allocated to you.
the ISP's DHCP server. This will extend the period for which the current WAN
IP address is allocated to you.
• IP Address – The IP address of the Load Balancer, as seen from the Internet.
This IP Address is allocated by the ISP (Internet Service Provider)
• Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
• Domain Name IP Address – The address of the current DNS (Domain Name
• Domain Name IP Address – The address of the current DNS (Domain Name
Server.
• MAC Address – The MAC (physical) address of the Load Balancer, as seen
from the Internet.
LAN
Information
Information
• IP Address – The LAN IP Address of the Load Balancer.
• Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
• MAC Address – The MAC (physical) address of the Load Balancer, as seen
• Subnet Mask – The Network Mask (Subnet Mask) for the IP Address above.
• MAC Address – The MAC (physical) address of the Load Balancer, as seen
from the local LAN.
• DHCP Server – The status of the DHCP Server function - either "Enabled" or
"Disabled".
Device
Information
Information
• Firmware Version – Version of the Firmware currently installed.
• NAT – Status of the NAT feature – either “Enable” or “Disable”.
• Load Balance – Status of the Load Balance feature – either “Enable” or
• NAT – Status of the NAT feature – either “Enable” or “Disable”.
• Load Balance – Status of the Load Balance feature – either “Enable” or
“Disable”.
• Virtual Server – Status of the Virtual Server feature – either "Enabled" or
"Disabled".
• Special Applications – Status of the Special Applications feature – either
"Enabled" or "Disabled".
• DMZ – Status of the DMZ feature – either "Enabled" or "Disabled".
• Block URL – Status of the Block URL feature – either “Enable” or “Disable”.
• Hardware ID – The manufacturers ID for this particular device.
• Block URL – Status of the Block URL feature – either “Enable” or “Disable”.
• Hardware ID – The manufacturers ID for this particular device.
Device
Statistics
Statistics
• System UpTime – The time since the system of a device was last
reinitialized.
• CPU Usage – The current usage percentage of CPU.
• Memory Usage – The current usage percentage of Memory (Heap & Queue).
• Memory Usage – The current usage percentage of Memory (Heap & Queue).
62