HP FIBRE CHANNEL TO SCSI ROUTER M8201R User Manual

M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005

6 -1

Hardware Replacement Procedures

This section includes:

Tape Drive and Fibre Channel to SCSI Router
Replacement

These procedures can be done for any tape drive that is connected to the Fibre
Channel to SCSI router. For information about what tape drives can be connected to a
Fibre Channel to SCSI router, see

Supported Storage Devices

on page 1-3. In these

procedures the N1525A tape drive is used.

Tape Drive Replacement

1. Perform a forced reset on the tape drive in SCF by entering in the following

command:

SCF> RESET TAPE1, FORCED

2. Power off the tape drive by pressing the power switch. For the location, see

Figure 6-1

Tape Drive and Fibre Channel to SCSI
Router Replacement

6-1

Figure 6-1. Location of the Power Switch on the Tape Drive

Power Switch