Mazda CX-9 Quick Setup Guide

3

4

    

 Park the vehicle.

    

  Adjust the seat to the desired position using the slide/tilt and  

recline switches.

    

  While pushing the memory seat SET button in, push one of the three  

programming buttons until a beep is heard. Programming is now

complete. Program the remaining two buttons as desired.

 

 

You can also program a seat position for each advanced key/retractable type  

key used with the vehicle. See Owner’s Manual for programming instructions.

 

•  

With driver’s door OPEn and ignition OFF, push and release one

of the programmed buttons (1, 2, or 3) when entering the vehicle.

 

 

•  

With driver’s door CLOSED and ignition On, push and hold one of  
the programmed buttons (1, 2, or 3).

Memory seat functions DO NOT operate when driver’s door is OPEN and

ignition is ON, when driver’s door is CLOSED and ignition is OFF, or when the vehicle

is in motion.

Seats

Seat can be moved back
and forth, raised, lowered,  
or tilted with this control.

Push forward or backward to increase or
decrease lumbar support.

Push forward or backward
to adjust seatback angle.

    

 Open liftgate.

    

  Lower head restraints.

      

Pull the strap on the rear of the  

seat while pushing the seat  

forward to lay flat.

Pull the strap to return the seatback to the original position.

 •   Pull the third-row seat access lever on the  

side of the second-row seatback to fold  

and slide the seat forward to access  

third-row seating.

 •   Return the second-row seatback to the  

normal upright position by pulling up on  

the seatback until it locks into place.

 •   Slide the second-row seat forward or back  

for proper legroom using the lever under  

the front of the seat.

To recline the seatback, lean forward slightly while pulling the third-row  

seat access or seatback folding lever. Then lean back to the desired  

position and release the lever.

    

 Unfasten the lap portion of the center-rear seat belt.

    

 Slide seat all the way back toward rear of vehicle.

    

 Lower head restraints.

    

 Pull the seatback folding lever and fold the seatback forward.

To create a flat luggage compartment  

space, fold the seatbacks forward.

193094_10a_CX-9_SSG_070109.indd   4-5

7/1/09   10:08:07 AM