Mazda CX-9 Quick Setup Guide

15

16

 •   Driver’s Temperature
 •   Climate Control
 •  Clock/Trip Computer

•   Audio
•   Bluetooth

®

Hands-Free

•   Outside/Passenger Temperature

nOTE: 

With defroster and floor vents or windshield defroster mode, the system

turns on the A/C compressor and selects the FRESH AIR mode. This helps defrost

the windows more efficiently by dehumidifying the air. The A/C compressor will

always be on in defroster mode, but the defroster (and floor) will deliver warm air

when the temperature dial is set to a warmer temperature and the engine warms up.

nOTE: 

If the rear AUTO button is pressed while the front A/C button is off, the rear  

air conditioning operates only to circulate air. Setting the temperature to the maximum

high or low will not provide the desired temperature at a faster rate.

Automatic Climate Control

The driver and front passenger
seats can be warmed by pushing
the applicable seat warmer button
while the ignition is ON.
•   Seat temperature increases as

the number of indicator lights
increases. Two lights equal
high, one light equals low.

•   When the seat warmers are

not needed, push button until
indicator lights are off.

Push to manually turn  

air conditioning ON or  

OFF while climate control

system is on.
Push to select the  

desired airflow mode.
Push to display outside

temperature. Push and hold  

for three seconds or longer  

to switch from Fahrenheit  

and Celsius or vice versa.
Push to turn climate  

control system off.
Push to defrost  

the windshield.

Push to defrost the  

rear window.
Push to allow control from the

rear controls (indicator on).
Rotate dial to turn the  

system ON and to select  

the desired fan speed.
Push to allow separate  

driver/passenger  

temperature control.
Push to recirculate cabin air

to reduce outside odors and

improve cooling (indicator  

on) or receive fresh air

(indicator off).

    

 Push AUTO to turn the front air conditioning on.

    

  Rotate AUTO dial (driver’s temperature control) to the desired cabin

air temperature setting (shown in the Information Display above).

   

nOTE: 

Rotating fan control dial, or pushing the MODE button, or A/C switch,

   

or windshield defroster switch while in AUTO ON mode will cancel auto A/C.

   •   To allow the passenger to independently control passenger side  

temperature setting, rotate the DUAL dial (passenger’s temperature

control) or push the DUAL button. The DUAL indicator will  

illuminate and passenger temperature setting will be displayed on  

the Information Display.

   •   To turn off Dual Zone operation, push the DUAL button.

    

 Turn the front air conditioning on.

    

 Push the REAR control button on the front

 

control panel (indicator on).

    

  Selection of the airflow mode, airflow amount

and temperature will be automatically controlled

to the same setting as the front air conditioner.

193094_10a_CX-9_SSG_070109.indd   16-17

7/1/09   10:09:38 AM