HP STORAGEWORKS SSL1016 User Manual

Page of 160
127
6
Troubleshooting
Before Contacting Technical Support
Before you contact technical support, use the information in this chapter to try and 
resolve the problem.
Problems with the autoloader can occur in the following forms:
Operational Problems
Error Messages
Operational Problems
Operational problems can range from compatibility issues with the operating 
system to failure of the front panel. 
 describes the probable cause and 
suggested action for each operational problem you may encounter.
Table 13:  Suggested Actions for Operational Problems
Problem
Probable Cause
Suggested Action
Front Panel does not 
display information.
The connection to the 
LCD has failed.
Use the Web Administration 
tool to troubleshoot the error.
The autoloader did not 
power up.
See, “Autoloader does not 
power up.”
The LCD has failed.
Replace the chassis assembly.
Autoloader is operating 
slowly.
The autoloader is 
incorrectly configured 
for the operating 
system.
Go to the HP support website 
for compatibility 
requirements: 
http://www.hp.com
Drive is operating 
slowly.
Drive head is dirty.
If the cleaning light is also on, 
clean the drive.
Media is worn out.
Try a new tape and discard 
the older media.