Hotpoint CIB 64 C. S User Manual

PLEASE PHONE US TO REGISTER YOUR APPLIANCE  AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

The control panel described in this manual is only a representative 
example: it may not exactly match the  panelon your appliance.

When using the touch control pannel  panel:
 

Do not use gloves

 

Use a clean finger

 

Touch the glass smoothly

1

  INCREASE POWER/ TIME button - controls the power 

and time 

2  REDUCE POWER/ TIME  button controls the power 

and time.

3  COOKING ZONE SELECTOR button is used to select 

the desired cooking zone 

4  ON/OFF button switches the appliance on and off.
5  CONTROL PANEL LOCK button prevents accidental 

changes to the hob settings and shows the control 
panel has been locked.

6   HEATER DISPLAY -shows the cooking zone selected, 

power level, preset time of cooking, booster funcition 
activated. 

! For detailed information on the control panel functions 
refer to “Start-up and use” section.

! This product complies with the requirements of the
latest European Directive on the limitation of power
c o n s u m p t i o n   o f   t h e   s t a n d b y   m o d e .
If no operations are carried out for a period of 2
minutes, after the residual heat indicator lights turn
off and the fan stops (if present), the appliance
a u t o m a t i c a l l y   s w i t c h e s   t o   t h e   . o f f   m o d e . .
The appliance resumes the operating mode once the
ON/OFF button is pressed.

! Depending on the number of heaters/cooking zones on 
the hob the COOKING ZONE SELECTOR BUTTONS may 
vary between          and 

!

 Before operating your new appliance please read 

this instruction booklet carefully. It contains important 
information concerning the safe operation, installation 
and maintenance of the appliance.

!

 Please keep these operating instructions for future 

reference. Pass them on to any new owners of the 
appliance.

!

 Keep all packaging material out of the reach of children. 

It may present a choking or suffocation hazard (see 
Precautions and tips

).

!

 The appliance must be installed by a qualified 

professional in accordance with the instructions provided. 
Incorrect installation may cause harm to people and 
animals or may damage property.

Built-in appliance
Use a suitable cabinet to ensure that the appliance 
functions properly.
•  The supporting surface must be heat-resistant up to a 

temperature of approximately 100°C.

•  If the appliance is to be installed above an oven, 

the oven must be equipped with a forced ventilation 
cooling system.

•  Avoid installing the hob above a dishwasher: 

if this cannot be avoided, place a waterproof 
separation device between the two appliances.

To allow adequate ventilation and to avoid overheating of the 
surrounding surfaces the hob should be positioned as follows:

•  At a minimum distance of 40 mm from the back panel 

or any other vertical surfaces.

•  So that a minimum distance of 20 mm is maintained 

between the installation cavity and the cabinet 
underneath.

•  Kitchen cabinets adjacent to the appliance and taller 

than the top of the hob must be at least 450 mm from 
the edge of the hob.

The appliance must be installed 

on a perfectly level 

supporting surface. Any deformities caused by improper 
fixing could affect the features and operation of the hob.
The thickness of the supporting surface 

should be taken 

into account when choosing 

the length of the screws for 

the fixing hooks:

•  3,5 mm thick: 9,5 mm screws

1

2

3

4

5

6