Hoshizaki DM-200B User Manual

13

To prevent corrosion, wipe the exterior occasionally with a clean and soft cloth. Use a 
damp cloth containing a neutral cleaner to wipe off oil or dirt build up.

When shutting off the dispenser for an extended time, drain out all water from 
the water line and remove the ice from the dispensing bin. The bin should be 
cleaned and dried. Drain the water supply line using air or carbon dioxide to 
prevent damage to the line at sub-freezing temperatures.

When the dispenser is not used for two or three days, it is sufficient to only remove the ice 
from the ice dispensing bin and unplug the unit, unless the dispenser will be at sub-freezing 
temperatures.

1) Close the water supply line shut-off valve and open the water supply line drain valve.
2) Allow the line to drain by gravity.
3) Attach compressed air or carbon dioxide supply to the water supply line drain valve.
4) Blow the water supply line out using compressed air or carbon dioxide.
5) While pressing the water dispense switch, blow compressed air or carbon dioxide 

through the water valve.

6) Close the water supply line drain valve.
7) Remove all ice from the ice dispensing bin.
8) Unplug the unit from the electrical outlet.
9) Clean and dry the dispensing bin.