Honda 08L07-SJC-100 User Manual
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
AlI 28614 (0502)
1 of 3
INSTALLATION
INSTRUCTIONS
INSTRUCTIONS
Accessory
Application
Publications No.
Issue Date
FEB 2005
RIDGELINE
MOTORCYCLE WHEEL GUIDE
P/N 08L07-SJC-100
08L07-SJC-1000-91
PARTS LIST
Front wheel guide
TOOLS AND SUPPLIES REQUIRED
Ratchet
4 mm Hex socket
Drill
3 mm and 9 mm Drill bits
Round file
Eye protection (face shield, safety goggles, etc.)
T50 Torx socket
T40 Torx socket
Center punch
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures
should not be attempted by “do-it-yourselfers.”
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures
should not be attempted by “do-it-yourselfers.”
NOTE:
•
Be careful not to damage the body finish.
•
Determine the location of the wheel guide. One or
more wheel guides can be installed in three different
locations.
more wheel guides can be installed in three different
locations.
1.
Remove the left front upper tie-down hook (two
torx bolts). Remove the right front upper tie-down
hook (two torx bolts).
torx bolts). Remove the right front upper tie-down
hook (two torx bolts).
2 Plates
8 Hex screws
4 Washers
8 Collars
LEFT FRONT UPPER
TIE-DOWN HOOK
TIE-DOWN HOOK
TORX
BOLT
BOLT
4610041H
All 28614
Put this information in the glove box with the vehicle owner's manual.
HandA-Accessories.com