Honeywell VCR DCP200 User Manual
DCP200 Profile Controller & Recorder - Product Manual
Page 40
Messages and Error Indications
51-52-25-150, Issue 1 – April 2009
PV Over-range or Under-range Indication
If the measured process variable value is more than 5% above than the Scale Range Upper
Limit, its value is replace by the word “HIGH”.
Limit, its value is replace by the word “HIGH”.
If the measured process variable value is more than 5% below than the Scale Range Lower
Limit, its value is replace by the word “LOW”.
Limit, its value is replace by the word “LOW”.
Auxiliary Input Over-range or Under-range Indication
If the auxiliary input (RSP) is more than 5% above than the Auxiliary Input Upper Limit, its
value is replace by the word “HIGH”.
value is replace by the word “HIGH”.
If the auxiliary input (RSP) is more than 5% below than the Auxiliary Input Lower Limit, its
value is replace by the word “LOW”.
value is replace by the word “LOW”.
If you need to return your instrument for servicing, check the Service Information screen
(available from the main menu) or contact your supplier.
(available from the main menu) or contact your supplier.
USB Data Transfer Problems
Data Transfer Failure message
If the instrument cannot successfully write to the USB memory stick, the message “Data
Transfer Failure” will be displayed. Check that there is adequate disk space on the memory
stick, then retry.
Transfer Failure” will be displayed. Check that there is adequate disk space on the memory
stick, then retry.
If the instrument cannot successfully read data from the USB memory stick, the message
“Data Transfer Failure” will also appear. Check that this operation would not cause the
maximum number of profiles and/or segments to be exceeded, then retry.
“Data Transfer Failure” will also appear. Check that this operation would not cause the
maximum number of profiles and/or segments to be exceeded, then retry.
Getting Help
First Level Support
If the errors persist or other problems are encountered, refer your supplier for first level
support. This includes help with configuration, tuning, servicing and replacement modules.
support. This includes help with configuration, tuning, servicing and replacement modules.
Second Level Support
If your supplier is unable to assist or cannot be contacted, check the Service Information
Page (in Configuration Mode) for details of whom to contact.
Page (in Configuration Mode) for details of whom to contact.
Third Level Support
If further assistance is required, contact the nearest company from those listed on the back
page of this manual.
page of this manual.