Honeywell Musical Instrument WT6500 User Manual

3 

Introduction

HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev 10

Please take note that the 

HONEYWELL™ Wind Turbine is a proprietary wind driven 

electric generator. It is designed to displace annual electric consumption by connecting 

it to the electric switch board in the proper procedures described in this Owner’s 

Manual. It may also be used on a stand-alone installation where connecting to a local 

electric grid is not possible. Its unique and high efficiency design enable it to work in 

very low wind areas starting at 2 miles per hour (mph) and much higher (to 38 mph).  

Please follow the Site Selection guidelines for optimal installation.

The 

HONEYWELL™ Wind Turbine is an electric generator.  Only licensed and trained 

personnel can perform the following installation and maintenance functions: 

•  Open and work on the 

SMARTBOX™ Control Equipment. 

•  Open and work on the Junction Box at the turbine  

•  Apply any torque to any of the turbine’s fasteners

The installation directions include recommendations of a variety of options.  Installation 

must be approved and certified by your local Professional Engineer (PE) and the 

installer must acquire all the necessary permits from the local authorities prior to 

installation. 

Your installer must use only proper grounding methods as stipulated by the NEC or 

CEC if in Canada. 

The 

HONEYWELL™ Wind Turbine is an electric generator.  Therefore high voltage 

is generated within the system.  Be sure to only use installers and maintenance 

professionals to perform work on this turbine. 

Failure to complete and mail in the registration card will affect the Warranty. 

Failure to use a licensed and trained installer or follow local codes will  

adversely affect the warranty coverage and possibly void your  

warranty.

Please contact WindTronics if there is any doubt or concern regarding this electric 

generator or its installation.