Honeywell Garage Door Opener 5828/5828V User Manual

Page of 4
 
 
K0021V2  2/06  Rev. A 
    ADEMCO 5828/5828V
Wireless Bidirectional Fixed-Word Keypads
USER GUIDE
 
 
GENERAL INFORMATION 
The ADEMCO 5828 and 5828V are wireless keypads 
that can be used to operate and get status from your 
security system. The 5828 and 5828V have the 
following features (voice annunciation features apply 
only to the 5828V): 
•  Can be used to arm/disarm, and perform other 
system operations. 
•  Can display and/or annunciate system status.  
•  Can automatically display and/or annunciate a 
change in system status if AC powered (e.g., for an 
alarm, the keypad will announce the type of alarm 
(fire or burglary) and location (e.g. kitchen window). 
•  The 5828V Message Center can be used to record 
and play back a voice memo to yourself, or leave a 
message for a family member. 
•  Can be battery- or AC-powered (AC-powered units 
have several advantages, described below). 
Battery-Powered Operation:  When powered by 
battery, the keypad must first be activated by pressing 
any numbered key.  The keypad will display the current 
system status within a few seconds.  You may at any 
time before or after receiving status, arm, disarm, send 
a panic alarm, or perform other system operations.  The 
keypad becomes inactive when no keys have been 
pressed for 15 seconds, and must be reactivated to 
display the current status. 
AC-Powered Operation: When powered by the 
optional AC adapter, the keypad remains active at all 
times.  If AC power is lost, the keypad reverts to 
battery-powered operation until AC power is restored 
and a new status request is made ([
✱] key). 
NOTE:  Whether the unit is powered by battery or AC, 
the 5828/5828V may take a few seconds to display 
and/or annunciate the new status after pressing the [
✱] 
key. 
 
5828V-00-006-V0
1
OFF
4
MAX
7
INSTANT
READY
2
AWAY
5
TEST
8
CODE
0
3
STAY
6
BYPASS
9
CHIME
#
MESSAGE
MIC
ARMED
READY
RECORD
VOLUME
PLAY
STATUS
FUNCTION
VOICE
D
C
B
A
5828V
ONLY
 
5828V Keypad with Front Cover Removed 
KEYPAD KEYS 
These keypads include 12-operational keys, as well as 
four Special Function keys that are backlit for ease of 
use when the keypad is active. To access the keypad 
keys, simply open the swing-down door by applying 
outward pressure on the door release slot on the right 
side.  
Panic alarms are activated by pressing the key pairs 
shown in the table below.  Special Function keys A, B, 
and C, can be programmed by your installer to provide 
the same alarms by pressing a single key and holding it 
down for 3-seconds, or can be assigned other system 
operations. (Ask your installer to fill in the tables below 
with assigned functions of these keys). 
 
Key 
Pairs 
Function  
Function 
Keys 
Function 
[1] & [
✱]   
 
[
✱] & [#] 
 
 
B  
 
[3] & [#] 
 
 
C  
 
 
 
 
 
SOUNDER 
The keypad’s built-in sounder pulses three times and 
then pauses (repeatedly) for fire alarms, and generates 
a continuous two-tone sound for burglary alarms. 
HOW TO GET SYSTEM STATUS 
When Powered By Battery 
Pressing any key will turn on the keypad.  However, to 
specifically request system status from the control, 
simply press the [
✱] key. Status will be displayed 
within a few seconds. 
When Powered By AC Power 
On AC powered units you can get the status by viewing 
the display. The keypad is automatically updated when 
a change in system status takes place (arming, 
disarming, trouble, etc.).   
HOW TO PROGRAM OR CHANGE YOUR 4-DIGIT 
SECURITY CODE IF USING QUICK KEY FUNCTIONS 
In order to Quick Arm the system using this keypad, 
you will need to program your own 4-digit security code 
into the keypad. This code must match a code that has 
already been programmed into your control panel. To 
program the 4-digit code, perform the following steps: 
1.  Press the  7 INSTANT  and  9 CHIME  keys at the 
same time until the display flashes double dashes   
(- -), then release.  
2.  Enter the 4-digit security code that matches a valid 
user code already programmed into your control 
panel. Do NOT use the Duress Code.  There will be 
no display of the numbers you pressed.