Hitachi SA200 User Manual
B Using the BIOS Setup Program
SA200
97
Resume on Modem Ring
When this option is enabled, the computer resumes from Suspend
to RAM mode when an incoming modem ring is detected. This
option does not apply to Suspend to Disk mode. The options are:
to RAM mode when an incoming modem ring is detected. This
option does not apply to Suspend to Disk mode. The options are:
•
Enabled
•
Disabled
The default value for this field is: Disabled
Note: The serial port is not monitored if you disable it in the
Advanced menu. PC Card ports are monitored only if the driver is
set correctly; see the PC card driver’s manual for details.
Advanced menu. PC Card ports are monitored only if the driver is
set correctly; see the PC card driver’s manual for details.
Resume on Alarm
When this option is enabled, you can set the Alarm Time and Date
the computer resumes on. This options applies to Suspend to Disk
mode. The options are:
the computer resumes on. This options applies to Suspend to Disk
mode. The options are:
•
Enabled
•
Disabled
The default value for this field is: Disabled
If you haven’t set up the system for Suspend to
Disk, or if the space reserved for the Suspend to
Disk partition isn’t large enough, the system will
default to Suspend to RAM mode and your
unsaved data will be lost when power is turned
off.
Disk, or if the space reserved for the Suspend to
Disk partition isn’t large enough, the system will
default to Suspend to RAM mode and your
unsaved data will be lost when power is turned
off.
lonestar.boo : sa200.fm Page 97 Friday, March 6, 1998 10:53 AM