Heath Zenith 9600LED series User Manual

Dated receipt required for warranty replacement.

•  Automatically comes on when motion is detected.
•  Automatically turns light off.
•  Photocell  keeps  the  light  off  during  daylight

hours.

•  The light control requires 120 volts AC.
•  If  you  want  to  use  Manual  Override  mode,  the

control must be wired through a switch.

 

nOtiCe: Not to be used on light dimmer or timer-
controlled circuits.

•

•  This  light  fixture  has  been  tested/certified  us-

ing  Lights  of  America  LED  Lamp  Model  No.
2025LEDE12.

Be sure to remove all contents from packaging and
verify all items are present before assembling this light
fixture. This package includes the following items:
•  Lantern
•  Three LED Lamps
 (Lights of America Model: 2025LEDE12)
•  Universal mounting bracket (X-Bar)
•  Mounting hardware
•  Wire nuts
•  Owner’s Manual

© 2008

598-1338-03

For best performance, mount the fixture about 6 feet
(1.8 m) above the ground.
1.  Remove two decorative nuts.
2.  Remove X-Bar.
3.  Tighten mounting screws on X-Bar finger tight.
4.  Attach X-Bar to junction box.

Junction Box

X-Bar

Decorative Nut

Lantern Base

Lantern Mounting
Screw

X-Bar

Bracket Mounting
Screw

Note: We recommend having an assistant help hold
the lantern assembly during the wiring process.